|
| 嘉實(shí)多潤滑油系列 > 耐高溫潤滑脂 > Castrol Pyroplex Blue 2/Castrol Pyroplex Blue2 |
| Castrol Pyroplex Blue 2/Castrol Pyroplex Blue2 詳細(xì)說明 （瀏覽1120次） |
Castrol Pyroplex Blue 2
MSDS # 453759
Historic MSDS #: 0000002021
Product use Grease for industrial applications.
For specific application advice see appropriate Technical Data Sheet or consult our company
representative.
Code 453759-US06
Manufacturer BP Lubricants USA Inc.
1500 Valley Road
Wayne, NJ 07470
Telephone: (973) 633-2200
Telecopier: (973) 633-7475
EMERGENCY HEALTH
INFORMATION:
1 (800) 447-8735
Outside the US: +1 703-527-3887 (CHEMTREC)
EMERGENCY SPILL
INFORMATION:
1 (800) 424-9300 CHEMTREC (USA)
OTHER PRODUCT
INFORMATION
1 (866) 4 BP - MSDS
(866-427-6737 Toll Free - North America)
email: bpcares@bp.com
2. Hazards identification
Physical state
Color Blue.
Emergency overview CAUTION !
MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN IRRITATION.
Prolonged or repeated contact can defat the skin and lead to irritation and/or dermatitis. In
accordance with good industrial hygiene and safety work practices, airborne exposures should be
controlled to the lowest extent practicable. Avoid contact with eyes, skin and clothing. Use only
with adequate ventilation. Keep container tightly closed and sealed until ready for use. Wash
thoroughly after handling.
Routes of entry Dermal contact. Eye contact. Inhalation.
Potential health effects
Eyes May cause eye irritation.
Skin May cause skin irritation. Prolonged or repeated contact can defat the skin and lead to irritation
and/or dermatitis.
Inhalation May cause respiratory tract irritation.
Ingestion Ingestion may cause gastrointestinal irritation and diarrhea.
See toxicological information (Section 11)
Grease
Date of issue 02/25/2013.
Castrol Pyroplex Blue 2 Page: 1/6
ENGLISH
(ENGLISH)
Product name Product code
Version 5 Format US Language
453759-US06
(US)
3. Composition/information on ingredients
Ingredient name CAS # %
Base oil - highly refined Varies 85 - 90
4. First aid measures
Eye contact In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention if symptoms occur.
Skin contact Immediately wash exposed skin with soap and water. Remove contaminated clothing and shoes.
Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if
symptoms occur.
Inhalation If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Ingestion Do not induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. If potentially dangerous quantities of this material have been
swallowed, call a physician immediately. Get medical attention if symptoms occur.
Notes to physician Treatment should in general be symptomatic and directed to relieving any effects.
Note: High Pressure Applications
Injections through the skin resulting from contact with the product at high pressure constitute a
major medical emergency. Injuries may not appear serious at first but within a few hours tissue
becomes swollen, discolored and extremely painful with extensive subcutaneous necrosis.
Surgical exploration should be undertaken without delay. Thorough and extensive debridement of
the wound and underlying tissue is necessary to minimize tissue loss and prevent or limit
permanent damage. Note that high pressure may force the product considerable distances along
tissue planes.
5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire.
No action shall be taken involving any personal risk or without suitable training.
Protective clothing (fire) Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Fire-fighting procedures
Hazardous combustion
products
Combustion products may include the following:
phosphorus oxides
metal oxide/oxides
carbon oxides (CO, CO2) (carbon monoxide, carbon dioxide)
sulfur oxides (SO, SO2 etc.)
Fire/explosion hazards In a fire or if heated, a pressure increase will occur and the container may burst.
Flash point Open cup: 232°C (449.6°F) [Cleveland.]
Extinguishing media
Suitable Use an extinguishing agent suitable for the surrounding fire.
Not suitable Do not use water jet.
6. Accidental release measures
No action shall be taken involving any personal risk or without suitable training. Keep
unnecessary and unprotected personnel from entering. Do not touch or walk through spilled
material. In accordance with good industrial hygiene and safety work practices, airborne
exposures should be controlled to the lowest extent practicable. Provide adequate ventilation.
Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal
protective equipment (see Section 8).
Environmental
precautions
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Inform the relevant authorities if the product has caused environmental pollution (sewers,
waterways, soil or air).
Personal precautions
Methods for cleaning up
Date of issue 02/25/2013.
Castrol |
|
|
